RJ45 100M Network Port, WF-X9-08, AndroidSBC, Halifax

TL;DR: RJ45 100M Network Port

AndroidSBC software desk: Android 10 baseline and staged OTA channel published for the X9 board family serving Halifax, Canada. The WF-X9-08 X9 Android motherboard spans the face recognition access control terminal and eleven sister configurations in the X9 series, all built on the A133 quad-core ARM Cortex-A53 1.6GHz SoC with the PowerVR GE8300 GPU, MIPI DSI output at 720p with camera input, and Android 10 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the X9 family from the Longgang source factory in Shenzhen to Halifax and Canada importers who run advertising players, digital signage networks, self-service query terminals, smart retail terminals, parcel lockers and access control panels.

About AndroidSBC and the X9 Android Motherboard Family

AndroidSBC builds display boards for the way signage networks actually buy: one pilot batch, then a frame agreement, then staggered releases against a call-off schedule. The X9 family supports that pattern because the bill of materials is frozen per lot and the Halifax partner can re-order the same configuration eighteen months later and receive the same board. Compliance paperwork is generated per destination: CE, FCC, RoHS and the local route for Canada, bundled with the lot so the importer clears customs without a second round of test reports.

WF-X9-08 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-X9-08 (face recognition access control terminal) holds its LVDS or MIPI panel drive plus touch sampling while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For Canada importers sourcing the X9 family, the WF-X9-08-A variant is the typical configuration for the access control terminal deployment use case, on a 120x75mm six-layer board with four 3mm mounting holes and a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing X9 Android Motherboards for Canada Buyers

The second problem is the touch layer. A board is useless to an interactive kiosk if the infrared frame needs a calibration pass nobody can run, or if the capacitive panel reports touches offset by a third of the screen.

On the touch side the HID configuration ships in the carton. Infrared, optical, capacitive and resistive panels enumerate as standard HID devices, so the Halifax integrator plugs the frame in and the screen reports touches without a calibration pass, and the ISED Canada documentation covers the radio modules too. AndroidSBC confirmed on September 24, 2026 that 73800 boards for Halifax were on the water via Vancouver - Shanghai, with the panel and touch validation report from the Longgang bench included in the packing list.

Competitive Comparison: WF-X9-08 vs Competing Commercial Display Android Boards

What follows is not a spec-sheet comparison. It is the four questions a Halifax operator asks after its first failed rollout.

• Panel and touch readiness: single or dual LVDS plus MIPI DSI at 30 or 40 pins, with infrared, optical, capacitive and resistive panels enumerating as HID devices, so Halifax integrators mount a locally sourced screen without a calibration pass.
• Bundled integration: panel jumper map, pin-one orientation note, touch HID configuration, playback modes and the peripheral driver set ship in the carton; competing display boards sold to Halifax usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the Halifax integrator to obtain.
• Long-term supply: onboard eMMC in 8GB, 16GB or 32GB, one fixed bill of materials per production lot and a seven-year firmware window, against the frequent component swaps seen on competing boards reaching Halifax.

Global Digital Signage and Commercial Display Market Trends

Video screens account for roughly 50.2 percent of the market by type and retail for about 50.1 percent by application. That matters to a Halifax buyer because it means the board is the part being specified, while the enclosure, the panel and the mounting hardware are often reused.

• Entry playback tier: WF-X9-08 covers loop, scheduled and interrupt playback on a single LVDS panel, which is the configuration most small signage networks standardise on.
• Interactive mainstream tier: WF-X9-01 pairs an LVDS or MIPI panel with infrared or capacitive touch for query, wayfinding and self-service kiosks.
• Connected and unattended tier: WF-X9-02 adds the 4G path, the -20C to 70C window and the watchdog behaviour that outdoor cabinets and parcel lockers require.

The Canada demand curve rewards the vendor who can hold a configuration. AndroidSBC publishes the X9 price list, MOQ and lead time because a Halifax partner is budgeting a multi-year refresh, not a single purchase order.

Partner Success Story: Kanto Shoukai Systems (convenience and station screen integrator)

A Kanto Shoukai Systems deployment in the Japanese convenience and transit segment illustrates how the X9 Android motherboard family supports Halifax integrators. Kanto Shoukai Systems installed 73800 X9 boards across 118 convenience and station screens.

• OEM relationship: AndroidSBC private-label SKU shipped with Kanto Shoukai Systems branding and CE / FCC / RoHS files bundled.
• Silicon lock: Allwinner A133 quad-core ARM Cortex-A53 1.6GHz with the PowerVR GE8300 GPU on every configuration, one fixed bill of materials per production lot.
• Peripheral driver package: bundled into the source-factory shipment, covering LVDS and MIPI panel drive, infrared, optical, capacitive and resistive touch, thermal printer, QR scanner, barcode scanner, NFC reader, RFID reader, ID card reader, fingerprint reader, camera and lock driver board.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus ISED Canada conformity, all bundled into the Shenzhen source-factory shipment.

Kanto Shoukai Systems Platform Manager for Japanese Convenience and Transit noted: Kanto Shoukai Systems qualified the X9 board on Japanese typography and standby power, and 73800 units went into the Halifax store network in the first release.

Field Report: access control terminal deployment at an office campus

BAOLONG, September 24, 2026 - Liang Shu, AndroidSBC field desk. On the Canada configuration the WF-X9-08 ran kiosk-mode lockdown with a single operator app, and the watchdog recovered the screen after each simulated mains dip. The WF-X9-08 X9 Android motherboard order for Halifax, Canada cleared the burn-in station on schedule and is en route via the Vancouver - Shanghai lane.

The WF-X9-08 face recognition access control terminal production lot includes the WF-X9-08-A variant as the typical configuration, with LVDS or MIPI panel driver, touch HID configuration and staged OTA management bundled into the source-factory shipment. For Canada integrators, the ISED Canada conformity plus ISED certification with a CSA or UL safety listing paperwork is bundled.

Filed by Liang Shu, AndroidSBC field desk, BAOLONG. Canadian transit and mall operators want bilingual English and French content templates and ask for CSA or cUL evidence on the assembled player.

WF-X9-08 Application Scenarios

The WF-X9-08 face recognition access control terminal sits inside a twelve-configuration X9 Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-X9-08-A configuration is the typical build for the access control terminal deployment use case, with panel driver, touch HID configuration and staged OTA management bundled.

• Advertising machine and digital signage: the WF-X9-08 runs loop, scheduled and interrupt playback on an LVDS panel in shop windows and store aisles.
• Interactive query and wayfinding: the WF-X9-03 pairs a MIPI or LVDS panel with infrared or capacitive touch for lobby and hospital directories.
• Smart retail terminal and vending: the WF-X9-04 carries the scanner, the printer and the payment peripheral on one board in a compact enclosure.
• Parcel locker and fresh food cabinet: the WF-X9-05 drives the screen and the lock driver board from the two serial lanes, with the watchdog holding a 7x24 duty cycle.
• Face recognition access control: the WF-X9-06 takes the camera input and the door controller wiring on the same board.
• Conference tablet and teaching all-in-one: LVDS or MIPI panel drive with HID touch and the industry publishing software already validated.
• Industrial HMI and IoT gateway: headless or panel configurations on the same bill of materials, with GPIO, I2C, SPI, PWM and ADC available for field wiring.
• Hotel, building and campus information publishing: scheduled power cycling plus remote content push across a mixed estate of screens.
• Retrofit programmes in Halifax: the same 120x75mm board re-uses the existing enclosure, panel and mounting pattern, so an installed estate can be upgraded screen by screen.

Partnership Models for Halifax Buyers

For Halifax and Canada buyers the question is rarely which board, it is which relationship. Three tracks cover the answers.

• Distribution track: the partner buys the X9 board against a published price list, keeps its own stock, and AndroidSBC supplies the panel files, the touch configuration and the compliance documents with each lot.
• Integration track: the partner takes the board plus firmware customisation, mounting drawings and panel validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the X9 board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed bill of materials held for the length of the agreement.

All three tracks give Halifax partners the same thing underneath: a factory-built board, a frozen bill of materials and a firmware window measured in years rather than months.

Frequently Asked Questions

Does the X9 Android motherboard family support a face recognition access control terminal?

Answer: Yes - face recognition access control terminal is supported across the X9 line, and the Halifax configuration is locked as the reference for later lots so re-orders behave identically.

Which configurations are available in the X9 family for Canada buyers?

Answer: Twelve configurations are offered and they all share one Android 10 image, so a Halifax partner can move between them without re-writing the application or re-qualifying the publishing software.

Can one X9 board drive an LVDS or MIPI panel plus infrared, capacitive or resistive touch?

Answer: Yes - that is the standard screen configuration. The panel runs on LVDS or MIPI, the touch frame on I2C or USB, and the printer on RS232 or USB, all validated together before the lot ships.

What is the minimum order quantity and the sample lead time for Canada?

Answer: One board is enough to start: samples leave Longgang in 1-3 days. Volume orders run 15-30 days, and the Halifax partner can call off against a frame agreement rather than ordering in one block.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes. The engineering desk handles custom ROM, boot branding, pre-installed apps, BSP porting and SDK modules, and the Halifax partner keeps the same image across re-orders.

How are firmware updates delivered to a Canada screen estate after deployment?

Answer: AndroidSBC ships staged OTA with rollback as a bundled tool, so a Canada estate of several hundred screens can be updated in waves rather than all at once.

What shipping terms does AndroidSBC support for Canada orders?

Answer: FOB Shenzhen, CIF and EXW are quoted on the same price list. Export customs clearance and global shipping are handled from Longgang, and the Halifax partner receives tracking with the lot.

What happens if a board fails in the field in Canada?

Answer: Each board carries a serial number logged against its burn-in record, so a field failure in Canada is traced to its production lot, and the replacement ships from the same frozen bill of materials.

Contact AndroidSBC: Start Your WF-X9-08 Sourcing Conversation

To start an X9 Android motherboard sourcing conversation with AndroidSBC, a Wanlin Manufacturing Group export brand, Halifax integrators can reach the export desk through the following channels:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

For Halifax and Canada the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.